Category Archives: VW Beetle

New Staging Prop

60's Transistor RadioI’ve been looking for one of these for a few weeks now and finally found one on Ebay at a very reasonable price. Not only that, but it’s only about 50 miles away from where I live. Just wanted it as a staging prop for car shows. Nothing says the 60’s like a nice transistor radio. Best of all, it’s new old stock in the box and it works!

New Trunk Liner

New Trunk LinerNew Trunk LinerNew Trunk LinerGot my new trunk liner from Wolfsburg West today. Very pleased with the fit, quality and price (minus the cost of shipping which was more than the cost of the product). Just what Mabel needed to dress out the trunk a bit. Made from the same material as the original liner, you’d be hard pressed to tell the difference.

Deck Lid Wall Light Project Part III

VW Deck Lid LightVW Deck Lid LightVW Deck Lid LightVW Deck Lid LightVW Deck Lid LightBetween last night and this evening, I got a lot done on the deck lid wall light. Got the shelf stained and sealed, it turned out exactly the way that I wanted it to. Made a trip to Hobby Lobby and picked up the light for the license plate hood. Got all of the wiring secured. Modified the license plate hood so the light would fit properly. Put everything together and hung it for a test fitting. I’m already working on another unit for a friend of mine, so I’m using the orange license plate hood until I can get my blue one put back one. Still waiting for the seal for the license plate hood, hopefully that will be here tomorrow or Friday and I can wrap this project up and call it complete. I’m very happy with the way it has turned out so far. Hope to get a pic of the finished product in a day or two.

Finished Product:
Finished Light / ShelfFinished Light / ShelfGot the seal for license plate hood in the mail today, so I buttoned up this project. So I ended up with less than 20 dollars in the whole project, but keep in mind, many of the parts where donated. Looking forward to finishing another one for a friend who donated some parts to this one. I’m very, very pleased with the way it turned out.

Deck Lid Light Project Part I

Deck Lid Light Project Part II

Another New Find

20160224_153443My daughter, Shauna, picked these up for me yesterday. Great find! Love the micro bus and the rat rod!

New Find

20160224_181030Picked up a couple new die cast to add to the collection while I was at Hobby Lobby this evening. Nicely detailed M2 Machines. One on the left is a 1960 VW Delivery Van and the one on the right is a 1967 VW Beetle Deluxe. Best part of the purchase is that both were 50% off, got both for around 10 bucks.

Deck Lid Wall Light Project Part II

LED's InstalledLED's InstalledLED's InstalledLED's InstalledI got the LED strip installed on the inner part of the deck lid that will provide back lighting. A friend of mine had ordered a bunch of these on Ebay, so he gave me a set to test. The strip can be cut and soldered in various lengths and double sided tape secures it to the deck lid. These are RGB LED strips, so they can display just about any color at any brightness. Pretty cool! A little bit of cable management and so far, I’m very happy with the results. Just need to make it to Hobby Lobby to pick up the light for the license plate housing, stain (maple) and seal the shelf, then hang it. I’ve already got a request for 2 more.

Deck Lid Light Project Part I

Deck Lid Light Project Part III

Wall Light Project

VW DecklidI’ll just leave you guessing with this pic. But I’ll tell you this….it will not go on a car. It will have a lot more rust on it when I’m finished. It will be functional and serve a purpose. I don’t have a plan for this project, I’m just winging it as I go. Don’t want to have a lot of money into the project, so I’m using spare parts around the garage. If I can do what I want to do for less than 50 dollars, I’ll be very happy!

VW Deck LidStarted with a donated deck lid from a friend of mine. It was actually in really good condition, so I began the process of aging it a bit. Trying to make it look like it’s been sitting in a field for about 20 years. Started by replacing the license plate light hood that I had laying around, also ordered a gasket for the hood. So far, I’m 12 dollars in to the project. Finished the night with some light sanding. BTW, as a rusting agent, I’m using 1 part white vinegar, 1 part hydrogen peroxide and 1 part table salt…heat the area, apply the mixture and let it sit. Works like a charm…!

Rusting VW Deck LidModified License Plate HoodFinished doing all of the sanding that I’m going to do on the deck lid. The idea is to have it look like it’s been sitting in a field for many years. As I mentioned before, I used a mixture of table salt, hydrogen peroxide and white vinegar on the bare metal to start the rusting process. So far, I’m very pleased with the results. I also had to modify the license plate light housing to accept the new light that I’ll be using. Still need to make a trip to Hobby Lobby to find what I’m looking for.

Clear CoatedFinished the rust enhancement, sanding and got everything clear coated in a satin finish. Mounted the license plate, cleaned up the deck lid release and fitted the license plate light hood. Ordered the proper seal for the hood, should be here some time next week. Still need to make a trip to Hobby Lobby to pick up the light, then I need to determine if I’m going to make this just a light fixture or a shelf. All in due time…. 🙂

VW Deck Lid ShelfVW Deck Lid ShelfGot the wood cut for the shelf and the VW badge installed. Still haven’t decided exactly what I’m going to do with the shelf. I cut this prototype out of 2×12, I don’t know if I’m going to stay with that or maybe try a 1×12. Also don’t know if I’m going to stain the wood or paint it. The overall weight of the entire display is much lighter than it looks. Hanging it, even while using the 2×12 for the shelf, shouldn’t be a problem. So far, I’m very pleased with the results… 🙂

Deck Lid Light Project Part II

Deck Lid Light Project Part III

Vintage Radio Install Part II

Vintage Radio InstallationVintage Radio InstallationVintage Radio InstallationFinished installing the vintage radio into the Beetle this evening. Had to remove the air intake to install the back support for the radio. Installed the speaker and buttoned everything up. Very pleased with the end result, wouldn’t hesitate to do it again.

Vintage Radio Installation